Waltron’s 9031CX Sodium Analyzer combines simplified design with uncompromised performance. This economic option can save your budget as well as mounting space.
Common 9031CX Sodium Analyzer application points in a boiler system for online sodium measurement include: make-up water, condensate, boiler feedwater and saturated steam/main steam.
Please contact us for panel mount version.
Large user friendly color touch screen interface
Wide analysis range: 0.1ppb – 10ppm
Quick connect electrodes and probe positioning clamps
Two 4-20 mA isolated current outputs
Low reagent and standard consumption
Internal data logger set to store readings every 10 minutes for 30 days
Minimal maintenance required
Automatically stores last 10 calibrations and alarms
Reagents: Ammonium Hydroxide (standard) or Di-isopropylamine (optional)
MODBUS and PROFIBUS connections coming soon!
0.10ppb – 10ppm
±5% of reading or ±0.1ppb (whichever is greater) within ±5°C of calibration temperature
±5% of reading or ±0.1ppb (whichever is greater) at constant temperature
Response Time (approximate)
90% of 1-10ppb step: less than 4 minutes; 90% of 100-1ppb step: 5 minutes
Alkaline vapor buffer: 0.88 SG (28% to 30% NH3) ammonia above 0.5ppb sodium, 99% diisopropylamine solution below 0.5ppb sodium
Two isolated 4-20mA current (analog) outputs
Communication interface via RS-232 & RS-485 using MODBUS RTU protocol
Three voltage-free contacts, alarm points set from transmitter rated at 2A, 250VAC (non-inductive)
Wide range of input power supply 90VAC – 250VAC
Certification (on request)
Meets low voltage and low electromagnetic compatibility directives
SAMPLE DELIVERY OPERATING CONDITIONS
Temperature: 41 – 131° F (5 – 55°C); Flow 150 – 400 ml/min
32 – 131°F (0 – 55°C)
5 – 30 psig (0.35 – 2.07 bar)
Sample should be filtered to 60 microns, free of film forming compounds
Transmitter – high strength ABS,IP65 (NEMA 4x)
Wet section – high strength ABS and sheet metal,all wetted parts stainless steel or PVC,IP55 (NEMA 4)
Transmitter: Height = 10.92” (27.74 cm), Width = 7” (17.78 cm), Depth = 3.54” (8.99 cm)
Wet Section: Height = 18.25“ (46.36 cm) including drain, Width = 11.25” (28.58 cm), Depth = 7.63” (19.38 cm)
Four key-style holes: Height = 0.86” (2.18 cm), Top Width = 0.281” (0.714 cm), Radius = 0.28” (0.711 cm) Horizontal: 9” (22.86 cm), Vertical: 12.875” (32.70 cm)
23 lbs. (10.44 kg)
Eight (8) conduit knockouts
Sample Inlet: 1/4” (0.635 cm) OD Swagelokt, Drain: 3/8” (0.953 cm) OD tube
Up to 325 feet (100 meters) on request
Chưa có đánh giá nào.