Waltron Series Single Point Sample Conditioning Modules help to lower temperature and pressure of single point samples providing versatility to your system.
Modules can be used before continuous analysis instruments or used to obtain grab samples. The main benefits of using a sample conditioning module are to protect analyzers and personnel and to ensure analyzer accuracy.
Modules are pre-engineered to your specifications
Minimal maintenance
Module delivered assembled with only cooling water,sample and drain connections required for start-up
Protection of instrumentation
List of options accommodates conditioning for any sample
Ensure correct sampling conditions
Convenient stainless steel sink holds grab sample bottle and acts as drain
Handles wide range of samples, pressures and temperatures for peak performance
Unit is compact and lightweight
Variety of analyzers can be mounted directly onto unit with larger plate
Unit is compact and lightweight
Variety of analyzers can be mounted directly onto unit with larger plate
SAMPLE SPECIFICATIONS
Pressure
Low Pressure: 0 – 1000 psig / 70 bar; High Pressure: 1000 – 5000 psig / 350 bar
Temperature
Low Temp:0– 450°F / 232°C;High Temp:up to 1000°F / 537°C
Flow
Up to 1500 ml/min
COOLING WATER SPECIFICATIONS
Pressure
35 – 150 psig / 2.45 – 10.5 bar
Temperature
Up to 100°F/37°C
Flow
4–12 gpm / 15.14 – 45.43 ml/min
Cooling water inlet/outlet connections:
from 3/8” FNPT to 3/4” FNPT
SYSTEM SPECIFICATIONS
Backplate
17“ x 27“ / 43.1 x 68.58 cm;304SS
Grab sample sink
304SS with 1/2” FNPT drain connection
High pressure inlet valve
1/4”OD compression type (for hot liquid) or 3/8”OD compression type (for steam). Inlet valve packing can be Teflon, PEEK or Grafoil.
Coolant isolation and throttling valves
BNZ
High temp thermal shut-off valve
304SS (for 0 – 3000 psi) or 316SS (for > 3000 psi) W6501
High pressure reducing valve
316SS
Temperature gauge
0–200°F/93°C;316SS
Pressure gauge
0–60 psig / 0 – 4.2 bar;316SS
Back pressure regulator
0–50 psig / 0 – 3.5 bar;316SS
Analyzer flowmeter
20 – 240 ml/min;acrylic and 316SS;with 1/4“ compression fitting outlet
Đánh giá
Chưa có đánh giá nào.