AQUALERT 6051M Hardness Monitor
3048 Iron Analyzer

3044 Hydrazine Analyzer

In Stock

Compare

Waltron’s 3040 series colorimetric analyzers provide exceptional results for online measuring of silica, phosphate and other parameters.

Small size and compact layout make the 3040 series an excellent choice for a variety of applications and environments. Waltron’s 3040 series colorimetric analyzers have been completely redesigned to offer unique and simplified configurations compared to previous models.

Accurate and wide-range analysis


Multi-stream available


Fast loop reservoir


Adjustable cycle and calibration frequency


Automatic calibration and validation (QA/QC)


Compact design


Color touchscreen display


Grab sample capability


Internal datalogger


Low reagent level alarm


No compressed air required


Automatic start/stop based on sample flow detection


Minimal analyzer maintenance


Panel mounting bracket available for Hach 5000 replacement

 

PERFORMANCE

Range
0 – 100ppb, 0 – 500ppb


Accuracy
+/– 2% of reading


Reproducibility
+/– 2% of reading


Sampling Frequency (Cycle Time)
One reading every 20 mins, adjustable


Required Maintenance
Every 2 weeks replenish reagents; Quarterly replace tubing


Reagent Consumption (approximate)
1 reagent, 4L per month


Sensor Classification
Colorimetric with glass flowcell and LED source


Application
10-45°C analyzer (50-113°F)


Ambient Temperature Range
10-45°C analyzer (50-113°F)


Atmospheric Pressure Range
No Limits


Humidity
Up to 90% not condensable


Unit Dimensions
Height=23.6”(60 cm), Width=15”(38 cm), Depth=8.3”(21 cm)


Positioning and Installation Details
Wall mounting, bench supported, or panel mounting (optional)


Weight
17 kg (37.5 lbs.


Degree of Protection
IP55 (NEMA 4): Wet section, IP65 (NEMA 4x): Electronics


Alarms
2 or 4 configurable alarm relays (Result, loss of sample, fault)


Power Supply (on request)
110-220Vac, 50-60 Hz 80 VA


Certification (on request)
Meets low voltage and low electromagnetic compatibility di

SAMPLE DELIVERY OPERATING CONDITIONS

Temperature Range
5-55º C (41-131º F)


Inlet Sample
100–500 ml/min, atmospheric, flexible tubing O.D. 1/4″(6mm)


Outlet Sample
Atmospheric, waste tubing O.D. 3/8″(9mm)


PH 
3-12


Sample Conditioning Requirements
Filtering between 10 and 60 micron, depending on the matrix, needed only to avoid clogging.


Materials in Contact with Sample
Glass, Silicone, Plexiglass, Stainless Steel AISI 316

SIGNAL OUTPUTS

Analog Outputs
4-20mA (galvanic isolator module available as option) or 0-5V)


Serial I/O for Signals

OPERATIONAL CALIBRATION

Single/Multi Point
Multi-Point: zero and mid range


Matrix Corrections
Yes, sample blank correction


Manual/Automatic
Both


Đánh giá

Chưa có đánh giá nào.

Hãy là người đầu tiên nhận xét “3044 Hydrazine Analyzer”

Email của bạn sẽ không được hiển thị công khai.

Your custom content goes here. You can add the content for individual product
Back to Top