Hiển thị 1–30 của 57 kết quả
Air Ejector Hybrid Vacuum Systems
Air Jets Combine with Liquid Ring Pumps to Deliver Deep Vacuum when Steam is Not Available
Suction Capacity: 1,000 ACFM or lower (1,700 m3/h or lower)
Vacuum Range: 0.4 to 2 inHgA (13 to 68 mbar abs.)
AWS, AWD & AWL series
The AW liquid ring vacuum pump are available in either single (AWS) or two stage pumps (AWS) and has a capacity of 170-37500 m³/h deliver vacuum levels down to 30mbar(a).
BIO GAS BLOWERS/COMPRESSORS
Available in wide range with pressure upto 4.0 bar ‘g’ and flew upto 20,000 m3 / hr. in various combination. These are either root type blower / compressor. Sliding Vane Type Compressor and Centrifugal Gas Blower depending upon pressure.
Booster Hybrid Vacuum Systems
Vacuum Boosters Combine with Liquid Ring Pumps to Deliver Efficient and Economical Vacuum Solutions
Suction Capacity: 500 to 20,000 ACFM (850 to 34,000 m3/h)
Vacuum Range: to 8 inHgA (to 270 mbar abs.)
CENTRIFUGAL FANS AND BLOWERS
Static pressure upto 1800 mmwg in single stage,Higher static pressure by multi-staging. ID / FD FANS Suitable for positive conveying and negative suction. Manufatured out of special materials for Gas conveying and fitted with Mechanical & Semi-mechanical seals. Capacity : Upto 400000 M3/Hr Pressure : Upto 2100 mm WC in single stage
CONDENSER EXHAUSTERS
Swam offers advanced design Condenser Exhauster for hogging and holding service in power generation. The system consists of liquid ring vacuum pumps, separator, heat exchanger and ejector (optional) with total recirculation. Capacity: As per requirement
DRY SCREW VACUUM PUMP
Swam dry screw vacuum pumps are designed under SWAM’s unique screw profile engineering to fulfill wide range of chemical and industrial processes. It is operating by rotating a paired screws that efficiently admit gases from inlet into the pump inside and compress through the screw’s swept volume toward the discharge.
DZM multi-claw pump
Dry multi-claw vacuum pumps DZM multi-claw pump A complete multi-claw vacuum pumping system in a box. A solution perfectly designed to meet your larger process demands. Plug & play This concept of design greatly reduces complexity and installation costs compared to other central systems designs. The package not only consists
DZS Dry claw pump
Dry Vacuum & overpressure pumps DZS Dry claw pump The simplicity, robustness, efficiency and contaminant handling capability of the DZS design pumps make them the smart choice for your application. Built to your exact standards and quality, the new dry claw pump provides you with a trouble-free and cost-effective solution.
ENER-JET Steam & Air Ejectors
Steam and air ejectors are the ideal solution for industries including oil & gas, chemical, and electrical power.
GLS 250-500 Series
Oil-sealed rotary piston pumps/combinations GLS 250-500 Series With an efficient space saving design, excellent performance and reliability, our GLS rotary piston pump is synonymous with efficiency and dependability. Low lifecycle cost Thanks to the slow rotational speed, reliability is optimum and lifecycle cost is low. State-of-the-art control Lubrication of the